Advance Adapters Full Bellhousing Adapter Kit For A 23 Spline, 1-1/8th 10 Spline Input Shaft Dodge NV4500 Replacing the Land Cruiser FJ40 3 spd (10 Spline) Transfer Case There are two 3/8 holes located on the side of the adapter for the mechanical shifter linkage. If your vehicle has a 3 speed vacuum-type shifter, these are not going to be used. they will need to be plugged with the hardware provided in the kit along with a small amount of silicone. When replacing a 3 speed transmission, driveline modifications will be required. This kit requires the installation of a GM input shaft into your Dodge transmission. NOTE: The installation of the new GM input shaft may require the transmission endplay to be reset. The stock front retainer must also be machined to accept the new throw out bearing. Kit Includes: - 50-0225 - Transfer case adapter kit (adapter length of 6.375)
- 52-0221 - GM 1 1/8 Input Shaft
- 712576 - Bellhousing kit
- 716050D1 - Shifter handle assembly
- 716288 - Land Cruiser slave cylinder bracket
- 716316 - Throw out bearing
|
