Advance Adapters Adapter Plate Kit For A 23 Spline, 1-1/8th 10 Spline Input Shaft Dodge NV4500 To Jeep 4.2L Adapter Plate Design (Peugeot Replacement)
The overall assembly length is 26.175". These kits require the use of a stock Peugeot (BA10/15) bellhousing. The 4.2 Jeep 6 cylinder engine can be easily adapted to the NV4500 using our adapter plate to the stock Peugot bellhousing. The internal release bearing will remain unchanged. When coupled to the Peugeot, the stock transfer case used a 21 spline input gear. This input gear must be replaced to match the output spline of your transmission. NOTE: These new gears will only fit the NP231 transfer ecase, and the transfer case must be disassembled for installation of this input gear.
The transfer case adapter is the shortest design possible to couple to the New Process transfer case. This adapter comes with a shifter bracket that allows the use of your stock transfer case shifter. These packaged kits include a new support crossmember which couples to the stock skid pan. Modifications will be required to your floorboard for the shifters, and the skid pan will require new holes to be drilled for our crossmember support. A body lift is normally recommended for clearance. Due to the different transfer case shift controls found on Jeep Cherokees, these kits should not be used with these vehicles.
Kit Includes:
- 50-0204 - Transfer case adapter kit
- 712557 - Adapter plate kit
- 716008 - Crossmember mount
- 716050D1 - Shifter handle assembly
- 716053 - 23T NP231 T/C input gear
|
